No cover art

Udemy - NREL Phase VI Wind Turbine CFD Analysis and Validation

Other
Size
3.3 GB
Seeders
2
Leechers
0
Files
98
Category
Other
Added
03/14/22 at 8:42pm GMT+1
Infohash
2ec64c4b0a2e898e87e8424e1717a2b229599029

Description
[ DevCourseWeb.com ] NREL Phase VI Wind Turbine CFD Analysis and Validation



If You Need More Stuff, kindly Visit and Support Us -->> https://DevCourseWeb.com







MP4 | Video: h264, 1280x720 | Audio: AAC, 44.1 KHz, 2 Ch

Genre: eLearning | Language: English + srt | Duration: 66 lectures (6h 52m) | Size: 3.35 GB



You will learn to use SolidWorks, Spaceclaim, ICEMCFD and Fluent to make CFD analysis of Horizontal Axis Wind Turbine



What you'll learn

Simulate the NREL Phase VI wind turbine case

Student will be able to simulate any type of wind turbine after attending this course

You will acquire skills in creating CAD model of horizontal axis wind turbine

You should be able to get accurate results for NREL Phase VI using skills taught in this course and also any other wind turbine



Requirements

Good understanding of using ANSYS (ICEMCFD, Spaceclaim, Fluent) and solidworks software. Although we will start from scratch but some basic working knowledge will be highly helpful.

Computer with at least 32 GB RAM and i7 processor with good graphics card.

LED monitor with size of 23 inch or more preferably 29 inch to properly visualize the results.

Basic knowledge of wind turbine theory

Basic knowledge of CFD and application on some simple CFD problems such as Airfoil or flat plate CFD



If You Need More Stuff, kindly Visit and Support Us -->> https://CourseWikia.com



Get More Tutorials and Support Us -->> https://FreeCourseWeb.com



We upload these learning materials for the people from all over the world, who have the talent and motivation to sharpen their skills/ knowledge but do not have the financial support to afford the materials. If you like this content and if you are truly in a position that you can actually buy the materials, then Please, we repeat, Please, Support Authors. They Deserve it! Because always remember, without "Them", you and we won't be here having this conversation. Think about it! Peace...



Image error



Image error

File list
  • Udemy - NREL Phase VI Wind Turbine CFD Analysis and Validation
  • ~Get Your Files Here !/1. Introduction/1. Introduction to course.mp4 27.8 MB
  • ~Get Your Files Here !/1. Introduction/1. Introduction to course.srt 5.7 KB
  • ~Get Your Files Here !/1. Introduction/1.1 Martin O. L. Hansen - Aerodynamics of Wind Turbines (2008, Earthscan).pdf 3.3 MB
  • ~Get Your Files Here !/1. Introduction/1.2 NREL Phase VI_CFD.pdf 5.5 MB
  • ~Get Your Files Here !/1. Introduction/1.3 NRELPHASEVI.xlsx 52 KB
  • ~Get Your Files Here !/1. Introduction/1.4 Reneable Energy.pdf 1.6 MB
  • ~Get Your Files Here !/1. Introduction/2. Brief overview of course.mp4 45.9 MB
  • ~Get Your Files Here !/1. Introduction/2. Brief overview of course.srt 5.8 KB
  • ~Get Your Files Here !/1. Introduction/3. Problem Description.mp4 133.7 MB
  • ~Get Your Files Here !/1. Introduction/3. Problem Description.srt 18.6 KB
  • ~Get Your Files Here !/1. Introduction/4. Data extraction from graph.mp4 23.6 MB
  • ~Get Your Files Here !/1. Introduction/4. Data extraction from graph.srt 3.5 KB
  • ~Get Your Files Here !/1. Introduction/s809_Airfoil/s809.xlsx 18.6 KB
  • ~Get Your Files Here !/1. Introduction/s809_Airfoil/S809_Airfoil.txt 1.3 KB
  • ~Get Your Files Here !/1. Introduction/s809_Airfoil/S809_practice.txt 1.3 KB
  • ~Get Your Files Here !/2. Geometry modeling of NREL Phase VI turbine in Solidworks/1. S809 airfoil coordinates.mp4 22.6 MB
  • ~Get Your Files Here !/2. Geometry modeling of NREL Phase VI turbine in Solidworks/1. S809 airfoil coordinates.srt 3.1 KB
  • ~Get Your Files Here !/2. Geometry modeling of NREL Phase VI turbine in Solidworks/10. Creating transition and base support for NREL Phase VI wind turbine blade.mp4 104.7 MB
  • ~Get Your Files Here !/2. Geometry modeling of NREL Phase VI turbine in Solidworks/10. Creating transition and base support for NREL Phase VI wind turbine blade.srt 12.5 KB
  • ~Get Your Files Here !/2. Geometry modeling of NREL Phase VI turbine in Solidworks/2. Understating flow angles in wind turbine.mp4 95.4 MB
  • ~Get Your Files Here !/2. Geometry modeling of NREL Phase VI turbine in Solidworks/2. Understating flow angles in wind turbine.srt 20.8 KB
  • ~Get Your Files Here !/2. Geometry modeling of NREL Phase VI turbine in Solidworks/3. Importing S809 coordinates into Solidworks 2020.mp4 66.6 MB
  • ~Get Your Files Here !/2. Geometry modeling of NREL Phase VI turbine in Solidworks/3. Importing S809 coordinates into Solidworks 2020.srt 11.4 KB
  • ~Get Your Files Here !/2. Geometry modeling of NREL Phase VI turbine in Solidworks/4. Creating plan 0 and sketch 0 for making airfoil from coordinates of S809.mp4 50.4 MB
  • ~Get Your Files Here !/2. Geometry modeling of NREL Phase VI turbine in Solidworks/4. Creating plan 0 and sketch 0 for making airfoil from coordinates of S809.srt 8.6 KB
  • ~Get Your Files Here !/2. Geometry modeling of NREL Phase VI turbine in Solidworks/5. Creating point at 30% chord length for defining rotation axis.mp4 37.6 MB
  • ~Get Your Files Here !/2. Geometry modeling of NREL Phase VI turbine in Solidworks/5. Creating point at 30% chord length for defining rotation axis.srt 6.2 KB
  • ~Get Your Files Here !/2. Geometry modeling of NREL Phase VI turbine in Solidworks/6. Creating square trailing edge.mp4 22.5 MB
  • ~Get Your Files Here !/2. Geometry modeling of NREL Phase VI turbine in Solidworks/6. Creating square trailing edge.srt 3.9 KB
  • ~Get Your Files Here !/2. Geometry modeling of NREL Phase VI turbine in Solidworks/7. Creating 21 plans at given radial locations for the blade section.mp4 56.9 MB
  • ~Get Your Files Here !/2. Geometry modeling of NREL Phase VI turbine in Solidworks/7. Creating 21 plans at given radial locations for the blade section.srt 6.5 KB
  • ~Get Your Files Here !/2. Geometry modeling of NREL Phase VI turbine in Solidworks/8. Creating 21 airfoils on 21 plans with given twist angle and chord length.mp4 58.1 MB
  • ~Get Your Files Here !/2. Geometry modeling of NREL Phase VI turbine in Solidworks/8. Creating 21 airfoils on 21 plans with given twist angle and chord length.srt 9.3 KB
  • ~Get Your Files Here !/2. Geometry modeling of NREL Phase VI turbine in Solidworks/9. Creating blade section from 21 section using Loft command in Solidworks.mp4 40.5 MB
  • ~Get Your Files Here !/2. Geometry modeling of NREL Phase VI turbine in Solidworks/9. Creating blade section from 21 section using Loft command in Solidworks.srt 5.8 KB
  • ~Get Your Files Here !/2. Geometry modeling of NREL Phase VI turbine in Solidworks/s809_Airfoil/s809.xlsx 18.6 KB
  • ~Get Your Files Here !/2. Geometry modeling of NREL Phase VI turbine in Solidworks/s809_Airfoil/S809_Airfoil.txt 1.3 KB
  • ~Get Your Files Here !/2. Geometry modeling of NREL Phase VI turbine in Solidworks/s809_Airfoil/S809_practice.txt 1.3 KB
  • ~Get Your Files Here !/2. Geometry modeling of NREL Phase VI turbine in Solidworks/SolidWorks/NREL Phase VI_bluentTE_finalmodel.SLDPRT 626 KB
  • ~Get Your Files Here !/2. Geometry modeling of NREL Phase VI turbine in Solidworks/SolidWorks/NREL Phase VI_bluentTE_step1.SLDPRT 118.3 KB
  • ~Get Your Files Here !/2. Geometry modeling of NREL Phase VI turbine in Solidworks/SolidWorks/NREL Phase VI_bluentTE_step2.SLDPRT 146.9 KB
  • ~Get Your Files Here !/2. Geometry modeling of NREL Phase VI turbine in Solidworks/SolidWorks/NREL Phase VI_bluentTE_step3.SLDPRT 211.3 KB
  • ~Get Your Files Here !/2. Geometry modeling of NREL Phase VI turbine in Solidworks/SolidWorks/NREL Phase VI_bluentTE_step4.SLDPRT 193.2 KB
  • ~Get Your Files Here !/2. Geometry modeling of NREL Phase VI turbine in Solidworks/SolidWorks/NREL Phase VI_bluentTE_step5.SLDPRT 189.5 KB
  • ~Get Your Files Here !/2. Geometry modeling of NREL Phase VI turbine in Solidworks/SolidWorks/NREL Phase VI_bluentTE_step6.SLDPRT 476.4 KB
  • ~Get Your Files Here !/2. Geometry modeling of NREL Phase VI turbine in Solidworks/SolidWorks/NREL Phase VI_bluentTE_step7.SLDPRT 510.3 KB
  • ~Get Your Files Here !/3. Creating inner and outer domain in Spaceclaim for NREL Phase VI wind turbine/1. Importing CAD model of NREL Phase VI turbine into ANSYS Spaceclaim.mp4 20.8 MB
  • ~Get Your Files Here !/3. Creating inner and outer domain in Spaceclaim for NREL Phase VI wind turbine/1. Importing CAD model of NREL Phase VI turbine into ANSYS Spaceclaim.srt 3.6 KB
  • ~Get Your Files Here !/3. Creating inner and outer domain in Spaceclaim for NREL Phase VI wind turbine/10. Making a symmetric model of full wind turbine.mp4 25.5 MB
  • ~Get Your Files Here !/3. Creating inner and outer domain in Spaceclaim for NREL Phase VI wind turbine/10. Making a symmetric model of full wind turbine.srt 6.3 KB
  • ~Get Your Files Here !/3. Creating inner and outer domain in Spaceclaim for NREL Phase VI wind turbine/2. Apply 3 deg global pitch angle to NREL Phase VI wind turbine.mp4 57.9 MB
  • ~Get Your Files Here !/3. Creating inner and outer domain in Spaceclaim for NREL Phase VI wind turbine/2. Apply 3 deg global pitch angle to NREL Phase VI wind turbine.srt 12.1 KB
  • ~Get Your Files Here !/3. Creating inner and outer domain in Spaceclaim for NREL Phase VI wind turbine/3. Creating assembly of full wind turbine including hub.mp4 85.8 MB
  • ~Get Your Files Here !/3. Creating inner and outer domain in Spaceclaim for NREL Phase VI wind turbine/3. Creating assembly of full wind turbine including hub.srt 15.2 KB
  • ~Get Your Files Here !/3. Creating inner and outer domain in Spaceclaim for NREL Phase VI wind turbine/4. Setting origin on the back side of hub of wind turbine model.mp4 24 MB
  • ~Get Your Files Here !/3. Creating inner and outer domain in Spaceclaim for NREL Phase VI wind turbine/4. Setting origin on the back side of hub of wind turbine model.srt 5.1 KB
  • ~Get Your Files Here !/3. Creating inner and outer domain in Spaceclaim for NREL Phase VI wind turbine/5. Creation of inner domain.mp4 53.7 MB
  • ~Get Your Files Here !/3. Creating inner and outer domain in Spaceclaim for NREL Phase VI wind turbine/5. Creation of inner domain.srt 8.9 KB
  • ~Get Your Files Here !/3. Creating inner and outer domain in Spaceclaim for NREL Phase VI wind turbine/6. Creation of outer domain.mp4 85.9 MB
  • ~Get Your Files Here !/3. Creating inner and outer domain in Spaceclaim for NREL Phase VI wind turbine/6. Creation of outer domain.srt 11.7 KB
  • ~Get Your Files Here !/3. Creating inner and outer domain in Spaceclaim for NREL Phase VI wind turbine/7. Named selection for inner and outer domains.mp4 28.3 MB
  • ~Get Your Files Here !/3. Creating inner and outer domain in Spaceclaim for NREL Phase VI wind turbine/7. Named selection for inner and outer domains.srt 7 KB
  • ~Get Your Files Here !/3. Creating inner and outer domain in Spaceclaim for NREL Phase VI wind turbine/8. Changing display properties and colors of geometry in spaceclaim.mp4 45.6 MB
  • ~Get Your Files Here !/3. Creating inner and outer domain in Spaceclaim for NREL Phase VI wind turbine/8. Changing display properties and colors of geometry in spaceclaim.srt 8.8 KB
  • ~Get Your Files Here !/3. Creating inner and outer domain in Spaceclaim for NREL Phase VI wind turbine/9. Making surfaces from solid body.mp4 7.2 MB
  • ~Get Your Files Here !/3. Creating inner and outer domain in Spaceclaim for NREL Phase VI wind turbine/9. Making surfaces from solid body.srt 1.7 KB
  • ~Get Your Files Here !/3. Creating inner and outer domain in Spaceclaim for NREL Phase VI wind turbine/SpaceClaim files/inner.scdoc 1.2 MB
  • ~Get Your Files Here !/3. Creating inner and outer domain in Spaceclaim for NREL Phase VI wind turbine/SpaceClaim files/NREL Phase VI_bluentTE_finalmodel_GlobalPitchAngle3deg.scdoc 243.7 KB
  • ~Get Your Files Here !/3. Creating inner and outer domain in Spaceclaim for NREL Phase VI wind turbine/SpaceClaim files/NREL Phase VI_bluentTE_finalmodel_GlobalPitchAngle3deg_twobladeshub.scdoc 459.4 KB
  • ~Get Your Files Here !/3. Creating inner and outer domain in Spaceclaim for NREL Phase VI wind turbine/SpaceClaim files/NREL Phase VI_inner.scdoc 461.7 KB
  • ~Get Your Files Here !/3. Creating inner and outer domain in Spaceclaim for NREL Phase VI wind turbine/SpaceClaim files/NREL Phase VI_outer_Domain1.scdoc 42 KB
  • ~Get Your Files Here !/3. Creating inner and outer domain in Spaceclaim for NREL Phase VI wind turbine/SpaceClaim files/NREL Phase VI_outer_Domain2.scdoc 40.4 KB
  • ~Get Your Files Here !/3. Creating inner and outer domain in Spaceclaim for NREL Phase VI wind turbine/SpaceClaim files/NREL Phase VI_outer_Domain3.scdoc 38.5 KB
  • ~Get Your Files Here !/3. Creating inner and outer domain in Spaceclaim for NREL Phase VI wind turbine/SpaceClaim files/outer.scdoc 217 KB
  • ~Get Your Files Here !/4. Unstructured meshing of NREL Phase VI wind turbine in ICEMCFD (Inner Domain)/1. Introduction.mp4 36.7 MB
  • ~Get Your Files Here !/4. Unstructured meshing of NREL Phase VI wind turbine in ICEMCFD (Inner Domain)/1. Introduction.srt 8.1 KB
  • ~Get Your Files Here !/4. Unstructured meshing of NREL Phase VI wind turbine in ICEMCFD (Inner Domain)/10. Defining mesh sizes on other parts.mp4 31.7 MB
  • ~Get Your Files Here !/4. Unstructured meshing of NREL Phase VI wind turbine in ICEMCFD (Inner Domain)/10. Defining mesh sizes on other parts.srt 3.7 KB
  • ~Get Your Files Here !/4. Unstructured meshing of NREL Phase VI wind turbine in ICEMCFD (Inner Domain)/11. Setting maximum elements size in Global mesh setup.mp4 13.5 MB
  • ~Get Your Files Here !/4. Unstructured meshing of NREL Phase VI wind turbine in ICEMCFD (Inner Domain)/11. Setting maximum elements size in Global mesh setup.srt 2.1 KB
  • ~Get Your Files Here !/4. Unstructured meshing of NREL Phase VI wind turbine in ICEMCFD (Inner Domain)/12. Part12_Adjusting meshing parameters to get rid of issues in mesh generation.mp4 88.1 MB
  • ~Get Your Files Here !/4. Unstructured meshing of NREL Phase VI wind turbine in ICEMCFD (Inner Domain)/12. Part12_Adjusting meshing parameters to get rid of issues in mesh generation.srt 13.2 KB
  • ~Get Your Files Here !/4. Unstructured meshing of NREL Phase VI wind turbine in ICEMCFD (Inner Domain)/13. Deleting volume mesh (Octree).mp4 6 MB
  • ~Get Your Files Here !/4. Unstructured meshing of NREL Phase VI wind turbine in ICEMCFD (Inner Domain)/13. Deleting volume mesh (Octree).srt 1.2 KB
  • ~Get Your Files Here !/4. Unstructured meshing of NREL Phase VI wind turbine in ICEMCFD (Inner Domain)/14. Smoothing surface mesh to improve mesh quality.mp4 9.9 MB
  • ~Get Your Files Here !/4. Unstructured meshing of NREL Phase VI wind turbine in ICEMCFD (Inner Domain)/14. Smoothing surface mesh to improve mesh quality.srt 1.9 KB
  • ~Get Your Files Here !/4. Unstructured meshing of NREL Phase VI wind turbine in ICEMCFD (Inner Domain)/15. Creating volume mesh using Delaunay method.mp4 37.2 MB
  • ~Get Your Files Here !/4. Unstructured meshing of NREL Phase VI wind turbine in ICEMCFD (Inner Domain)/15. Creating volume mesh using Delaunay method.srt 5.5 KB
  • ~Get Your Files Here !/4. Unstructured meshing of NREL Phase VI wind turbine in ICEMCFD (Inner Domain)/16. Density box for mesh refinement - Introduction to density box creation.mp4 58.4 MB
  • ~Get Your Files Here !/4. Unstructured meshing of NREL Phase VI wind turbine in ICEMCFD (Inner Domain)/16. Density box for mesh refinement - Introduction to density box creation.srt 6 KB
  • ~Get Your Files Here !/4. Unstructured meshing of NREL Phase VI wind turbine in ICEMCFD (Inner Domain)/17. Density box for surface mesh refinement on interface 3.mp4 100.7 MB
  • ~Get Your Files Here !/4. Unstructured meshing of NREL Phase VI wind turbine in ICEMCFD (Inner Domain)/17. Density box for surface mesh refinement on interface 3.srt 13.8 KB
  • ~Get Your Files Here !/4. Unstructured meshing of NREL Phase VI wind turbine in ICEMCFD (Inner Domain)/18. Density box Refining Volume mesh in wake region of wind turbine.mp4 62.1 MB
  • ~Get Your Files Here !/4. Unstructured meshing of NREL Phase VI wind turbine in ICEMCFD (Inner Domain)/18. Density box Refining Volume mesh in wake region of wind turbine.srt 6.9 KB
  • ~Get Your Files Here !/4. Unstructured meshing of NREL Phase VI wind turbine in ICEMCFD (Inner Domain)/19. Mesh types in ICEMCFD and definition of Prism meshing.mp4 20.2 MB
  • ~Get Your Files Here !/4. Unstructured meshing of NREL Phase VI wind turbine in ICEMCFD (Inner Domain)/19. Mesh types in ICEMCFD and definition of Prism meshing.srt 6.1 KB
  • ~Get Your Files Here !/4. Unstructured meshing of NREL Phase VI wind turbine in ICEMCFD (Inner Domain)/2. Importing geometry of inner domain into ICEMCFD.mp4 22 MB
  • ~Get Your Files Here !/4. Unstructured meshing of NREL Phase VI wind turbine in ICEMCFD (Inner Domain)/2. Importing geometry of inner domain into ICEMCFD.srt 4.7 KB

Rating
Not rated yet
Log in to rate

Comments

No comments yet.


Similar torrents
NameSizeDate
41 MBToday2754318356
8 MBToday2748518309
24 MBToday2747018313
37 MBToday2742518292
865 MBYesterday2697242
712 MB07/13/261667423
730 MB07/19/261611199
783 MB07/19/261583145
722 MB07/27/261579395
822 MB07/13/261542292
819 MB07/20/261370417
458 MB09/11/261366128
1 GB07/06/261223338
2.8 GB08/19/261201441
431 MB07/18/261173498